Home Battery 50kWh
- Capacity (kWh): 50kWh
- Battery System: Low-voltage battery storage system
- Scenario: Home Backup
- System Format: Wall-Mounted
Basic category template for debugging. Banner → Intro → Products → Applications → Proof → CTA.
Most homeowners do not struggle with knowing what a battery is — they struggle with choosing one that actually fits real life. Will it cover the fridge, Wi-Fi, and lights during an outage? Can it store daytime solar for evening use without wasting power? Will it work with the inverter already installed? And what happens when the home needs more capacity later?
A home battery stores electricity from the grid or solar panels so your household can use it when you need it most — at night, during peak rates, or when the grid goes down. The hard part is matching capacity, backup time, inverter compatibility, and installation space to your load — not just picking a model name.
SORYQEX builds home battery systems around those buyer pain points: clear capacity options, inverter-ready platforms, expandable storage, and support for backup, solar self-consumption, and daily energy shifting. Before you decide, we help you check load power, required backup hours, voltage platform, and whether the system fits a wall-mounted or floor-mounted home installation — so you buy a battery that works for your house, not just a product page.
| Parameter | Value |
|---|---|
| Usable Capacity | 50–200 kWh |
| Cycle Life | ≥ 6000 cycles @ 80% DoD |
| Voltage Class | 48V low-voltage platform |
| Warranty | Up to 10 years limited warranty |
Looking for more models or a custom configuration? Contact us and we will match the right energy storage products for your project.
Contact UsNo products match. Clear filters to see all.
Match capacity to real loads so you neither undersize nor overbuy.
| System Need | Product Direction |
|---|---|
| Small home solar battery | 5kW Hybrid Solar Inverter |
| Home backup and daily solar use | 8kW Hybrid Inverter |
| Larger home or small business | 10 Kilowatt Hybrid Inverter |
| Low-voltage battery system | 48V Hybrid Inverter |
| Three-phase grid site | 3 Phase Hybrid Inverter |
The table below uses the product names from the Home Battery Products section and the documented specifications available for each product.
| Model | IP Rating | Rated Voltage | Drainage / Installation | Fire Protection |
|---|---|---|---|---|
| Home Battery 50kWh | IP20 | 512V DC | Wall-Mounted | BMS / protection system |
| Home Battery 100kWh | IP54 | 358.4V DC | Wall-Mounted | Aerosol fire extinguishing |
| Home Battery 200kWh | — | — | Floor Standing | — |
Residential backup install showing wall-mounted battery and critical-load panel wiring.
Daytime solar charging and evening discharge for higher self-consumption.
Looking for more install clips or a custom project walkthrough? Contact us and we will share matching energy storage project videos.
Contact Us
Keep critical loads running during grid outages.
Store daytime solar for evening self-consumption.
Raise solar self-use and cut peak grid import.
Review loads, backup panel and install space.
Match battery kWh, inverter output and grid phase.
Mount, wire, configure and safety-test.
Train the owner and deliver documents.
Covered fridge, Wi-Fi and lighting through an 18-hour outage.
Daytime solar charging cut evening peak import by about 35%.
Stable backup for lights, networking and refrigeration circuits.
Add up watts × hours for critical loads, add backup days and a 20-30% buffer, then match battery kWh and inverter output.
Yes if the system supports parallel packs at the same voltage and communication protocol—confirm expansion ports before purchase.
Not always, but VOC, MPPT range and input current must fit the inverter solar input limits.
Running power and startup surge for fridges, pumps and air conditioners, plus load separation for whole-home backup.