Home Solar Storage Battery
10kWh Battery
10kWh LiFePO4 pack for home solar storage and backup. Wall and floor use the same battery. Electrical ratings are in the table below.
Core Specification
| Core Specification | Value |
|---|---|
| Nameplate Energy | 10kWh |
| Nominal Voltage | 51.2V DC |
| Battery Chemistry | LiFePO4 |
| Operating Voltage | 48–57.6V DC |
| Recommended Power | 5kW |
| Communication | RS485 / CAN |
| Installation | Wall-Mounted / Floor-Mounted |
| Expansion | Up to 6 Units in Parallel |
Choose a configuration
Installation is wall or floor. It is the same 51.2V pack either way, for indoor use.
Full Specifications
| Specification | Details |
|---|---|
| Recommended Charge / Discharge Current | ≤100A |
| Maximum Charge / Discharge Current | 150A / 15s |
| Maximum Charge / Discharge Power | 7,500W / 15s |
| Depth of Discharge | ≥95% |
| Protection Rating | IP21 |
| Cycle Life | ≥6,000 Cycles |
| Charging Temperature | 0°C to 55°C |
| Discharging Temperature | -20°C to 55°C |
| Display | LCD + LED |
| Protection | Smart BMS / Breaker / Fuse |
| Warranty | 5 Years |
| Net Weight | 66kg |
| Gross Weight | 84kg |
| Product Dimensions | 704 × 468 × 179mm |
| Package Dimensions | 793 × 561 × 349mm |
Product Overview
When to Use This Pack
Choose this model when daily home backup needs about 10kWh. Wall and floor use the same pack, and the IP21 rating is for indoor installation.
Need less storage? Use the 5kWh model. Need more from this pack? Parallel up to 6 units, 60kWh total. The 15kWh model is linked at the bottom of this page.
Real Use & Backup Time
The hours below are 10kWh divided by the connected load. Keep each pack within the 5kW recommended power. Inverter losses are not included in this table.
| Connected Load | Nominal Battery-Side Runtime |
|---|---|
| 500W | 20 hours (10kWh ÷ 0.5kW) |
| 1kW | 10 hours (10kWh ÷ 1kW) |
| 2kW | 5 hours (10kWh ÷ 2kW) |
| 3kW | 3.3 hours (10kWh ÷ 3kW) |
| 5kW | 2 hours (10kWh ÷ 5kW) |
At 5kW, nameplate energy gives about 2 hours. Send the load list, inverter model, and backup target with the quote request.
Inverter & Solar Compatibility
Confirm the inverter before ordering. Do not match this pack by the 10kWh nameplate alone.
| Compatibility Item | Required Match |
|---|---|
| Nominal voltage | The inverter must accept a 51.2V battery |
| Operating window | The inverter must stay inside 48–57.6V DC |
| Communication | RS485 or CAN |
| Output per pack | Recommended power is 5kW. The 15-second maximum is 7,500W |
The inverter must support 51.2V, RS485 or CAN, and the charge and discharge limits in the specification table.
Buyers comparing a 48V lithium pack should confirm that the inverter accepts a 51.2V nominal LiFePO4 system.
Installation, Protection & Expansion
Installation and protection parameters for this model.
| Feature | Details |
|---|---|
| IP Rating | IP21 |
| Rated Voltage | 51.2V DC |
| Operating Voltage | 48–57.6V DC |
| Drainage / Installation | Wall-Mounted / Floor-Mounted |
| Fire Protection | Smart BMS / Breaker / Fuse |
Parallel Expansion Capacity
| Battery Quantity | Total Nominal Energy |
|---|---|
| 1 Battery | 10kWh |
| 2 Batteries | 20kWh |
| 4 Batteries | 40kWh |
| 6 Batteries | 60kWh |
One unit is 10kWh. The bank can grow to 6 units, 60kWh. Series connection is not recommended.
Product and Installation Videos
FAQ
Is the wall pack a different battery from the floor pack?
No. Wall and floor are two ways to install the same 51.2V battery. The IP21 rating is for indoor use.
How long does backup last?
Calculated time is 10kWh divided by the connected load. At 1kW that is about 10 hours. At 5kW that is about 2 hours. Inverter losses are not included.
What load can this model run?
Keep the continuous load within the 5kW recommended power. The 15-second maximum is 7,500W.
Can it work with my inverter?
The inverter must accept 51.2V, stay inside 48–57.6V DC, and use RS485 or CAN. Send the inverter model with the quote request.
Is this a 48V battery?
Nominal voltage is 51.2V DC. Buyers looking for a 48V pack still need an inverter that accepts 51.2V nominal.
Can the system be expanded?
Yes. Up to 6 units in parallel, from 10kWh to 60kWh. Series connection is not recommended. Confirm the inverter before paralleling.
Should I buy this pack, the 5kWh model, or the 15kWh model?
Use the 5kWh model when about 5kWh is enough. Use this pack for about 10kWh. Use the 15kWh model, or parallel more than one of these units, when daily backup needs more than 10kWh.
