01
50kWh Battery
Small workshop
For small workshops, lighting, and control loads.
Industrial
Protect factory loads with industrial energy storage for backup power, peak shaving, and solar storage.
Applications
Choose the factory need first: backup, production protection, peak shaving, solar storage, or microgrid.
-
When the grid fails
Factory Backup Power
Protect key loads with factory backup power during grid failure.
-
Keep controls online
Production Protection
Keep PLCs, control cabinets, monitoring, and safety systems online.
-
Cut demand peaks
Peak Shaving
Use peak shaving battery storage to reduce demand peaks.
-
If the factory has solar
Industrial Solar Energy Storage
Store factory solar power for later use.
-
Weak-grid industrial sites
Microgrid
Support weak-grid sites with a microgrid energy storage system.
Supported Loads
Check power and startup current before sizing an industrial battery energy storage system.
-
Production Lines
Support selected loads after power and startup current checks.
-
PLC & Control Cabinets
Keep automation and control systems online.
-
Pumps & Compressors
Check motor startup current before sizing the battery energy storage system.
-
Lighting & Safety Systems
Protect lighting, CCTV, alarms, fire systems, and access control.
Compatibility
Confirm phase type, outdoor install, grid connection, and expansion before ordering.
-
Three-Phase Loads
Support three-phase loads when PCS, voltage, and site distribution match.
-
Outdoor Installation
Install an outdoor energy storage cabinet near factories or warehouses.
-
Grid Connection
Support backup power, solar storage, and demand control.
-
Expansion
Plan expansion before ordering the first industrial energy storage system.
Capacity Planning
Match factory load size, backup time, peak shaving target, and expansion plan.
02
100kWh Battery
Warehouse / small factory
For warehouses, small factories, and selected critical loads.
03
215kWh Outdoor Energy Storage Cabinet
Peak shaving / solar
For factory peak shaving and industrial solar energy storage.
04
500kWh Battery Energy Storage System
Larger factories
For larger factories and multi-load backup.
05
1MWh Battery Energy Storage System
Parks / microgrids
For industrial parks, microgrids, and Containerized BESS projects.
Recommended Products
From workshop batteries to outdoor cabinets and park-scale Containerized BESS.
Project Videos
Factory layout, outdoor cabinet install, PCS connection, load test, and peak shaving.
-
Factory Project
Cabinet placement and site layout.
-
Outdoor Cabinet Installation
Outdoor cabinet installation on industrial sites.
-
PCS Connection
PCS, battery cabinet, grid connection, and protection setup.
-
Load Test
Selected loads, startup behavior, and backup response.
-
Peak Shaving Project
How industrial battery storage supports demand control.
FAQ
Can it protect key factory loads?
Yes, after load power, startup current, phase type, and backup time are checked.
Can it support three-phase loads?
Yes, when PCS capacity, voltage, and site distribution match.
How do I choose 50kWh, 100kWh, 215kWh, 500kWh, or 1MWh?
Choose by load size, backup time, peak shaving target, solar capacity, and expansion plan.
Can it be installed outdoors?
Yes, with the right protection rating, ventilation, spacing, and site conditions.
Can it be used for peak shaving?
Yes, when PCS and EMS are configured for demand control.
Can it work with factory solar panels?
Yes, when PV capacity, PCS, EMS, and site distribution match.
Can it be used as an industrial backup power system?
Yes, after critical loads, PCS capacity, backup time, and site connection are checked.
Can the system be expanded later?
Yes, if cabinet design, PCS capacity, site space, and grid limits allow expansion.